• SAE AS568C

SAE AS568C

  • Aerospace Size Standard for O-Rings
  • standard by SAE International, 12/03/2008
  • Category: SAE

$81.00 $41.00

This Aerospace Standard specifies the inside diameters, cross-sections, tolerances, and size identification codes (dash numbers) for O-rings used in sealing applications and for straight thread tube fitting boss gaskets. The dimensions and tolerances specified in this standard are suitable for any elastomeric material provided that suitable tooling is available.

This standard is intended to be used in the preparation of Company, Military, or other Standard Drawings for O-Rings. Each dash number, which should be appended to an appropriate Drawing or Standard number, identifies one nominal size O-Ring only.

No attempt is made in this AS to indicate which of the O-Ring sizes listed under this system should be included in any particular Standard Drawing. Its only purpose is to standardize O-Ring sizes and dimensional tolerances and the means of identifying them dimensionally.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE J 429

SAE J 429

Mechanical and Material Requirements for Externally Threaded Fasteners..

$41.00 $81.00

SAE USCAR24-2

SAE USCAR24-2

USCAR INFLATOR TECHNICAL REQUIREMENTS AND VALIDATION..

$41.00 $81.00

SAE AMS5334H

SAE AMS5334H

Steel, Investment Castings 0.50Cr - 0.55Ni - 0.20Mo (0.25 - 0.35C) (SAE 8630 Mod) Normalized and Tem..

$41.00 $81.00

SAE AMS6516A

SAE AMS6516A

Steel, Bars and Forgings 1Cr – 10Ni – 7Co – 2Mo – 1.3W – 0.1V – (0.28 – 0.32C) Vacuum ..

$41.00 $81.00