• SAE AS5857A

SAE AS5857A

  • Gland Design, O-ring and Other Elastomeric Seals, Static Applications
  • standard by SAE International, 10/25/2017
  • Category: SAE

$81.00 $41.00

This SAE Aerospace Standard (AS) provides standardized gland (groove) design criteria and dimensions for elastomeric seal glands for static applications. The glands have been specifically designed for applications using SAE AS 568 size O-rings at pressures exceeding 1500 psi (10.3 MPa) utilizing one ot two anti-extrusion (backup) rings and applications at pressures under 1500 psi (10.3 MPa) without backup rings. The glands have been sized to provide increased squeeze as compared to AS 4716 for more effective sealing at low temperatures and low seal swell conditions. These glands are not recommended for dynamic use. Primarily usage is for static external sealing.

The rod dimensions are the same as AS4716. The cylinder bore dimensions are the same as AS4716 except for sizes -001 thru -011 and -104 thru -113.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS4153L

SAE AMS4153L

Aluminum Alloy, Extrusions 4.5Cu - 0.85Si - 0.80Mn - 0.50Mg (2014-T6) Solution and Precipitation Hea..

$41.00 $81.00

SAE AMS4555K

SAE AMS4555K

Leaded Brass, Seamless Tubing 66.5Cu - 32.5Zn - 0.48Pb Light Annealed (O50)..

$41.00 $81.00

SAE AMS5667N

SAE AMS5667N

Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 72Ni - 15.5Cr - 0.95Cb - 2.5Ti..

$41.00 $81.00

SAE AMS6910B

SAE AMS6910B

Titanium Alloy Bars, Forgings and Forging Stock 8Al - 1Mo - 1V Duplex Annealed..

$41.00 $81.00