• SAE AS6235A

SAE AS6235A

  • Face Seal Gland Design, Static, O-ring and Other Seals for Aerospace Hydraulic and Pneumatic Applications
  • standard by SAE International, 12/19/2015
  • Category: SAE

$81.00 $41.00

This SAE Aerospace Standard (AS) specifies standardized gland design criteria and dimensions for static face seals for internal pressure and external pressure applications for aerospace hydraulic and pneumatic applications using the same size range as AS4716 and AS5857 where applicable. Some small diameter sizes are excluded because they are not practical.

The glands have been specifically designed for applications using AS568 size elastomeric O-rings with related Class 2 tolerances at nominal system operating pressures up to 3,000 psi (20,680 kPa) utilizing no anti-extrusion (backup) rings.

While the gland dimensions herein have been designed for pressures up to 3,000 psi (20,680 kPa) these glands may be used for higher pressures, but extra precautions need to be taken and testing should be performed to ensure integrity of performance.

This specification covers the basic design criteria and recommendations for use with standard size elastomeric O-rings, however, these glands are also suitable for use with other elastomeric and polytetrafluoroethylene (PTFE) based seal geometries.

PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS2301K

SAE AMS2301K

Steel Cleanliness, Aircraft Quality Magnetic Particle Inspection Procedure..

$41.00 $81.00

SAE AMS6281J

SAE AMS6281J

Steel, Mechanical Tubing 0.50Cr - 0.55Ni - 0.20Mo (0.28 - 0.33C) (SAE 8630)..

$41.00 $81.00

SAE AMS6282J

SAE AMS6282J

Steel Tubing, Mechanical 0.50Cr - 0.55Ni - 0.25Mo (0.33 - 0.38C) (SAE 8735)..

$41.00 $81.00

SAE AMS2310F

SAE AMS2310F

Qualification Sampling and Testing of Steels for Transverse Tensile Properties..

$41.00 $81.00