• SAE AS6285B

SAE AS6285B

  • Aircraft Ground Deicing/Anti-Icing Processes
  • standard by SAE International, 05/09/2019
  • Category: SAE

$81.00 $41.00

This document establishes the minimum requirements for ground based aircraft deicing/anti-icing methods and procedures to ensure the safe operation of aircraft during icing conditions on the ground. This document does not specify the requirements for particular aircraft models.

NOTE: Refer to particular aircraft operator or aircraft manufacturer's published manuals and procedures.

The application of the procedures specified in this document are intended to effectively remove and/or prevent the accumulation of frost, snow, slush, or ice contamination which can seriously affect the aerodynamic performance and/or the controllability of an aircraft. The principal method of treatment employed is the use of fluids qualified to AMS1424 (Type I fluid) and AMS1428 (Type II, III, and IV fluids).

All guidelines referred to herein are applicable only in conjunction with the applicable documents. Due to aerodynamic and other concerns, the application of deicing/anti-icing fluids shall be carried out in compliance with engine and aircraft manufacturer's recommendations.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE J2710_201204

SAE J2710_201204

Modal Testing and Identification of Lower Order Tire Natural Frequencies of Radial Tires..

$41.00 $81.00

SAE AMS5650F

SAE AMS5650F

Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing, and Rings 23Cr - 13.5Ni (SAE 3030..

$41.00 $81.00

SAE AMS5860F

SAE AMS5860F

Steel, Corrosion-Resistant, Sheet, Strip, and Plate 12Cr - 8.5Ni - 0.30Cb - 1.1Ti - 2.0Cu Multiple M..

$41.00 $81.00

SAE AMS5808C

SAE AMS5808C

Steel, Corrosion and Heat-Resistant, Welding Wire 19Cr - 13Ni - 2.5Mo High Ferrite Grade, Trace Elem..

$41.00 $81.00