• SAE EIA585

SAE EIA585

  • Zero Acceptance Number Sampling Procedures and Tables for Inspection by Attributes of Isolated Lots (Stabilized: Jul 2015)
  • standard by SAE International, 07/01/2015
  • Category: SAE

$81.00 $41.00

Conventional attribute sampling based upon acceptance numbers that permit acceptance of a lot when some allowable number of nonconformances are encountered during inspection are no longer desirable. In addition, emphasis to the Lot Tolerance Percent Defective (LTPD) value or the Limiting Quality Portection of MIL-STD-105. Measuring quality levels in percent nonconforming. although not incorrect, has been replaced with quality levels measures in part per million (PPM). As a result, this standard addresses the need for sampling plans that can augment MIL-STD-105 are based upon a zero acceptance number, and address quality (nonconformance levels in the parts per million range. This document does not address minor nonconformances, which are defines as nonconformances that are not likely to reduce materially the usability of the unit of product for its intended purpose.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE J2331_201311

SAE J2331_201311

Operator¿¿¿s Field of View - Engineering Evaluation..

$41.00 $81.00

SAE J951_201311

SAE J951_201311

Florida Exposure of Automotive Finishes..

$41.00 $81.00

SAE J1091_201311

SAE J1091_201311

Earthmoving Machinery - Operator¿¿¿s Field of View..

$41.00 $81.00

SAE AMS5643/H1025

SAE AMS5643/H1025

Steel, Corrosion-Resistant, Bars, Wire, Forgings, Tubing, and Rings, 16Cr - 4.0Ni - 0.30Cb - 4.0Cu, ..

$41.00 $81.00