• SAE EIAEDIFAG1

SAE EIAEDIFAG1

  • Using EDIF 200 for Schematic Transfer (Stabilized: Jun 2016)
  • standard by SAE International, 06/16/2016
  • Category: SAE

$81.00 $41.00

This document offers some conventions for the use of EDIF in transfer applications involving schematic designs. It discusses the use of EDIF 2 0 0 constructs that apply to the SCHEMATIC view.

This document does not attempt to cover the use of EDIF for the transfer of all design aspects, It is intended to be a starting point for implementing EDIF schematic translators. It is not an EDIF user manual. It is not an amendment to the EDIF 2 O O Recommended Standard ANSIIEIA-548, which contains the official definition of the format and should always be taken as the authoritative source of EDIF information.

This document assumes you are familiar with schematic capture systems but not familiar with EDIF. You will need to refer to EIA-548 for detailed definitions of some of the constructs discussed below.

PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AS13000

SAE AS13000

Problem Solving Requirements for Suppliers..

$41.00 $81.00

SAE AS13000FR

SAE AS13000FR

Exigences en r¿¿solution de probl¿¿mes pour les fournisseurs..

$41.00 $81.00

SAE J684_201405

SAE J684_201405

Trailer Couplings, Hitches, and Safety Chains¿¿¿Automotive Type..

$41.00 $81.00

SAE AMS5669B

SAE AMS5669B

Alloy Bars, Corrosion and Heat Resistant Nickel Base - 15.5Cr - 0.95 (Cb + Ta) - 2.5Ti - 0.70Al - 7...

$41.00 $81.00