• SAE J 2617

SAE J 2617

  • Recommended Practice for Testing Performance of PEM Fuel Cell Stack Sub-system for Automotive Applications
  • standard by SAE International, 11/01/2007
  • Category: SAE

$81.00 $41.00

This recommended practice is intended to serve as a procedure to verify the functional performance, design specifications or vendor claims of any PEM (Proton Exchange Membrane) type fuel cell stack sub-system for automotive applications. In this document, definitions, specifications, and methods for the functional performance characterization of the fuel cell stack sub-system are provided. The functional performance characterization includes evaluating electrical outputs and controlling fluid inputs and outputs based on the test boundary defined in this document.

In this document, a fuel cell stack sub-system is defined to include the following: Fuel cell stack(s) - An assembly of membrane electrode assemblies (MEA), current collectors, separator plates, cooling plates, manifolds, and a supporting structure; Connections for conducting fuels, oxidants, cooling media, inert gases and exhausts; Electrical connections for the power delivered by the stack sub-system; Devices for monitoring electrical loads; Devices for monitoring cell voltage; Humidification devices; Instrumentation for detecting normal and/or abnormal operating conditions; Enclosures (that may qualify as pressure vessels), and ventilation systems for the enclosure.

Not included in the sub-system are the following: Fuel and air processors; Thermal management system; Power conditioner and distributor; Controllers
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS5518M

SAE AMS5518M

Steel, Corrosion Resistant, Sheet and Strip 18Cr - 8Ni Cold Rolled, 150 ksi (1034 MPa) Tensile Stren..

$41.00 $81.00

SAE AS27198B

SAE AS27198B

SEAL, BONDED, 302 CORROSION RESISTANT STEEL, AMS5516, MOLD IN GROOVE, FLUOROSILICONE RUBBER, MIL-DTL..

$41.00 $81.00

SAE AS31001B

SAE AS31001B

CONNECTOR, RECEPTACLE, ELECTRIC, WALL MOUNTING, SOLDER CONTACTS, AN TYPE..

$41.00 $81.00

SAE AS33411B

SAE AS33411B

BRACKET, MOUNTING, PLASTIC FOR USE WITH MS3367 PLASTIC TIEDOWN STRAPS..

$41.00 $81.00