• SAE J 2843

SAE J 2843

  • R-1234fy (HFO-1234yf) Recovery/Recycling/Recharging Equipment for Flammable Refrigerants for Mobile Air-Conditioning Systems
  • standard by SAE International, 01/01/2013
  • Category: SAE

$81.00 $41.00

This SAE Standard applies to equipment to be used with R-1234yf refrigerant only. It establishes requirements for equipment used to recharge R-1234yf to an accuracy level that meets Section 9 of this document and purity levels defined in SAE J2099. Refrigerant service equipment is required to ensure adequate refrigerant recovery to reduce emissions and provide for accurate recharging of mobile air conditioning systems. Equipment shall be certified to meet all performance requirements outlined in this document and international/regional construction and safety requirements as outlined in this document.

The purpose of this SAE Standard is to establish the specific minimum equipment requirements for the recovery/recycle/recharge of HFO-1234yf (R-1234yf) refrigerant that has been directly removed from, and is intended for reuse in, mobile air conditioning systems and system recharging of recycled or virgin R-1234yf.. Establishing such specifications will ensure that system operation with recycled R-1234yf will provide the same level of performance and durability as new refrigerant.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AS7469B

SAE AS7469B

Bolts and Screws, UNS N07041 Nickel Alloy, Corrosion and Heat Resistant, 155 ksi, Procurement Specif..

$41.00 $81.00

SAE AMS2630D

SAE AMS2630D

Inspection, Ultrasonic Product Over 0.5 Inch (12.7 mm) Thick..

$41.00 $81.00

SAE AMS2632B

SAE AMS2632B

Inspection, Ultrasonic, of Thin Materials 0.50 Inch (12.7 mm) and Under in Cross-Sectional Thickness..

$41.00 $81.00

SAE AMS2759/2H

SAE AMS2759/2H

Heat Treatment of Low-Alloy Steel Parts Minimum Tensile Strength 220 ksi (1517 MPa) and Higher..

$41.00 $81.00