• SAE J1061_201211

SAE J1061_201211

  • Surface Discontinuities on General Application Bolts, Screws, and Studs
  • standard by SAE International, 11/19/2012
  • Category: SAE

$81.00 $41.00

This SAE Recommended Practice defines, illustrates, and specifies allowable limits for various types of surface discontinuities that may occur during the manufacture and processing of bolts, screws, and studs in sizes through 24 mm or 1 in diameter inclusive with lengths to 150 mm or 6 in inclusive, having specified minimum tensile strengths of 900 MPa or 120 000 psi and greater, which are primarily intended for use in automotive assemblies.

The recommended practice does not include inspection sampling requirements other than for referee purposes.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS2759/4D

SAE AMS2759/4D

Heat Treatment Austenitic Corrosion-Resistant Steel Parts..

$41.00 $81.00

SAE AMS2759/5E

SAE AMS2759/5E

Heat Treatment Martensitic Corrosion-Resistant Steel Parts..

$41.00 $81.00

SAE AMS2759F

SAE AMS2759F

Heat Treatment of Steel Parts General Requirements..

$41.00 $81.00

SAE AMS4332A

SAE AMS4332A

Aluminum Alloy, Extruded Profiles (7349-T76511) 8.1Zn - 1.7Cu - 2.2Mg - 0.16Zr Solution Heat Treated..

$41.00 $81.00