• SAE J1113/11_201201

SAE J1113/11_201201

  • Immunity to Conducted Transients on Power Leads
  • standard by SAE International, 01/30/2012
  • Category: SAE

$81.00 $41.00

This SAE Standard defines methods and apparatus to evaluate electronic devices for immunity to potential interference from conducted transients along battery feed or switched ignition inputs. Test apparatus specifications outlined in this procedure were developed for components installed in vehicles with 12-V systems (passenger cars and light trucks, 12-V heavy-duty trucks, and vehicles with 24-V systems). Presently, it is not intended for use on other input/output (I/O) lines of the device under test (DUT).

Installed electrical equipment is powered from sources which contain, in addition to the desired electrical voltage, transients with peak values many times this value, caused by the release of stored energy during the operation of a relay and/or other loads connected to the source while starting and/or turning off the vehicle. These tests are designed to determine the capability of equipment to withstand such transients. The tests are performed in the laboratory (bench tests). Bench test methods give results, which also allow comparison between laboratories. These tests may not cover all types of transients, which can occur in a vehicle. The test pulses described in Section 8 are, however, characteristic of typical pulses. To ensure proper operation of a vehicle in the electromagnetic environment, vehicle testing should be performed in addition to bench testing.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE J425_201801

SAE J425_201801

Electromagnetic Testing by Eddy Current Methods (Stabilized: Jan 2018)..

$41.00 $81.00

SAE J426_201801

SAE J426_201801

Liquid Penetrant Test Methods (Stabilized: Jan 2018)..

$41.00 $81.00

SAE J427_201801

SAE J427_201801

Penetrating Radiation Inspection (Stabilized: Jan 2018)..

$41.00 $81.00

SAE J428_201801

SAE J428_201801

Ultrasonic Inspection (Stabilized: Jan 2018)..

$41.00 $81.00