• SAE J1194_200904

SAE J1194_200904

  • Rollover Protective Structures (ROPS) for Wheeled Agricultural Tractors
  • standard by SAE International, 04/02/2009
  • Category: SAE

$81.00 $41.00

Fulfillment of the intended purpose requires testing as follows: a laboratory test, under repeatable and controlled loading, to permit analysis of the ROPS for compliance with the performance requirements of this SAE standard. Either the static test (5.1) or the dynamic test (5.2) shall be conducted; a crush test to verify the effectiveness of the deformed ROPS in supporting the tractor in an upset attitude; a field upset test under reasonable controlled conditions, both to the rear and side, to verify the effectiveness of the protective system under actual dynamic conditions. (See 5.4.1.1 for requirements for the omission of this test.); and in addition to the laboratory and field loading requirements, there is a temperature-material requirement.

The test procedures and performance requirements outlined in this document are based on currently available engineering data.

The purpose of this document is to establish the test and performance requirements of a rollover protective structure (ROPS) designed for wheel-type agricultural tractors to minimize the frequency and severity of operator injury resulting from accidental upsets. All self-propelled implements are excluded.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS2438E

SAE AMS2438E

Plating, Chromium Thin, Hard, Dense Deposit..

$41.00 $81.00

SAE AS22759/80C

SAE AS22759/80C

WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYMIDE INSULATED, LIGHT WEIGHT, TIN COATED, COPPER CONDU..

$41.00 $81.00

SAE AS22759/92C

SAE AS22759/92C

WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, LIGHT WEIGHT, NICKEL COATED, COPPER C..

$41.00 $81.00

SAE AS3120A

SAE AS3120A

BOLT, MACHINE - HEXAGON HEAD, DRILLED 6 HOLES, PD SHANK, AMS5731, UNS S66286, .5625-18 UNJF-3A..

$41.00 $81.00