• SAE J1194_201611

SAE J1194_201611

  • Rollover Protective Structures (ROPS) for Wheeled Agricultural Tractors (Stabilized: Nov 2016)
  • standard by SAE International, 11/23/2016
  • Category: SAE

$81.00 $41.00

Fulfillment of the intended purpose requires testing as follows:

A laboratory test, under repeatable and controlled loading, to permit analysis of the ROPS for compliance with the performance requirements of this SAE Standard. Either the static test (6.1) or the dynamic test (6.2) shall be conducted.

A crush test to verify the effectiveness of the deformed ROPS in supporting the tractor in an upset attitude.

A field upset test under reasonably controlled conditions, both to the rear and side, to verify the effectiveness of the protective system under actual dynamic conditions. (See 6.4.1.1 for requirements for the omission of this test).

In addition to the laboratory and field loading requirements, there is a temperature-material requirement. (See 7.1.2.)

PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AS5498

SAE AS5498

Minimum Operational Performance Specification for Inflight Icing Detection Systems..

$41.00 $81.00

SAE J755_200912

SAE J755_200912

Marine Propeller-Shaft Ends and Hubs..

$41.00 $81.00

SAE AS6039D

SAE AS6039D

Bearings, Ball, Rod End, Double Row, Self-Aligning..

$41.00 $81.00

SAE AMS4080N

SAE AMS4080N

Aluminum Alloy, Drawn Seamless Tubing, 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-0), Annealed..

$41.00 $81.00