• SAE J1264_201105

SAE J1264_201105

  • Joint RCCC/SAE Fuel Consumption Test Procedure (Short Term In-Service Vehicle) Type 1 (Stabilized: May 2011)
  • standard by SAE International, 05/10/2011
  • Category: SAE

$81.00 $41.00

This recommended practice provides minimum requirements for testing components or systems of the type which can be switched from one truck to another with relative ease; i.e., aerodynamic devices, clutch fans, radial tires, and the like. The test utilizes in-service fleet vehicles, operated over representative routes. The relative fuel effectiveness of the component or system under test is determined as a percentage improvement factor. This factor is calculated using the relative fuel usage of like vehicles operating with and without the specific component or system under evaluation. Accuracy capability employing this test technique is either +-1% or +-2%, depending upon the method of fuel measurement.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS5368D

SAE AMS5368D

Steel, Corrosion-Resistant, Investment Castings 15Cr - 4.0Ni - 2.3Mo - 0.09N Solution Heat Treated..

$41.00 $81.00

SAE AMS5370D

SAE AMS5370D

Steel, Corrosion and Heat-Resistant, Investment Castings 19Cr - 9.5Ni (CF-3) Solution Heat Treated..

$41.00 $81.00

SAE AMS5859D

SAE AMS5859D

Steel, Corrosion Resistant, Sheet, Strip, and Plate 15Cr - 6.5Ni - 0.75Mo - 0.30Cb - 1.5Cu Consumabl..

$41.00 $81.00

SAE AMS5358C

SAE AMS5358C

Steel Castings, Investment, Corrosion Resistant 18Cr - 9Ni Solution Heat Treated..

$41.00 $81.00