• SAE J1281_201611

SAE J1281_201611

  • Operator Sound Pressure Level Exposure Measurement Procedure for Powered Recreational Craft
  • standard by SAE International, 11/15/2016
  • Category: SAE

$81.00 $41.00

This SAE Standard establishes the procedure for determining the operator duty cycle sound pressure level Lodc to which operators of powered recreational craft up to 24 m in length are exposed during typical operation as determined by marine engine duty cycle studies. This document describes the instrumentation, the required calibration procedures, the test site, the specifications for “standard craft”, the craft operating conditions, microphone positioning, test procedure, engine speeds for each of the Duty Cycle modes and the formula and table for calculating the Duty Cycle operator ear sound pressure level.

This document is subject to change to keep pace with technical advances as well as other international standards and practices.

Changes in this Revision: The sound pressure level measurements performed while applying this document are based on the Five-Mode Marine Engine Duty Cycle instead of a single engine speed. A calculation is required to obtain the Duty Cycle operator ear sound pressure level (Lodc). Provisions for type testing are provided along with specifications for Standard Craft.

PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS4417C

SAE AMS4417C

Castings, Sand, Magnesium Alloy 1.5Ag - 2.1Di - 0.08Cu - 0.70Zr (EQ21A - T6) Solution and Precipitat..

$41.00 $81.00

SAE AMS4461A

SAE AMS4461A

Aluminum Alloy, Sheet and Plate, Alclad 4.4Cu - 1.5Mg - 0.60Mn (Alclad 2024-O, Sheet and Plate) Anne..

$41.00 $81.00

SAE AMS4942G

SAE AMS4942G

Titanium Tubing, Seamless Annealed, 40.0 ksi (275 MPa) Yield Strength..

$41.00 $81.00

SAE AMS5340E

SAE AMS5340E

Steel, Corrosion Resistant, Investment Castings 14Cr - 4.25Ni - 2.25Mo - 0.25Cb - 3.25Cu Homogenizat..

$41.00 $81.00