• SAE J1474_201202

SAE J1474_201202

  • Heavy-Duty Nonmetallic Engine Cooling Fans--Material, Manufacturing, and Test Considerations
  • standard by SAE International, 02/06/2012
  • Category: SAE

$81.00 $41.00

The following topics are included in this report: Section 2—References, Section 3—Definitions, Section 4—Material Selection, Section 5—Production Considerations, Section 6—Initial Structural Integrity, Section 7—In-Vehicle Testing, Section 8—Laboratory Testing

The Material Selection section lists environmental factors and material properties which should be considered when determining appropriate fan material(s) for a given application.

The Production Considerations section covers various aspects of machine selection, mold design, and process control.

The Initial Structural Integrity section lists factors which should be considered in addition to those covered by the same section of SAE J1390.

The In-Vehicle Testing section lists factors which should be considered in addition to those covered by the same section of SAE J1390.

The Laboratory Testing section addresses some test considerations and methods for nonmetallic fans which differ from those used with metallic fans or which were not included in the Durability Test Methods section of SAE J1390.

This report exists to identify general methodology which addresses the areas of evaluation listed previously for injection-molded nylon fans. It is envisioned that those working with other processes and/or materials can use SAE J1390 and this document as starting points in the development of structural analysis methodology pertinent to their particular combination(s).
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS5747D

SAE AMS5747D

Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 72Ni - 15.5Cr - 0.95Cb(Nb) - 2..

$41.00 $81.00

SAE J2848/3_201202

SAE J2848/3_201202

Tire Pressure Systems - Management (CTIS) Type For Medium and Heavy Duty Highway Vehicles..

$41.00 $81.00

SAE J759_201202

SAE J759_201202

Lighting Identification Code..

$41.00 $81.00

SAE AMS4420N

SAE AMS4420N

Magnesium Alloy Castings, Sand 6Al - 3Zn (AZ63A-F) As Cast..

$41.00 $81.00