• SAE J1492_200810

SAE J1492_200810

  • Measurement of Light Vehicle Stationary Exhaust System Sound Level Engine Speed Sweep Method
  • standard by SAE International, 10/27/2008
  • Category: SAE

$81.00 $41.00

This SAE Recommended Practice establishes the test procedure, environment, and instrumentation to be used for measuring the exterior exhaust sound level for passenger cars, multipurpose vehicles, and light trucks under stationary conditions providing a continuous measure of exhaust system sound level over a range of engine speeds.

This document applies only to road vehicles equipped with an internal combustion engine.

The method is designed to meet the requirements of simplicity as far as they are consistent with reproducibility of results under the operating conditions of the vehicle.

It is within the scope of this document to measure the stationary A-weighted sound pressure level during: measurements at the manufacturing stage; measurements at official testing stations; measurements at roadside testing.

It does neither specify a method to check the exhaust sound pressure level when the engine is operated at realistic load nor a method to check the exhaust sound pressure levels against a general noise limit for categories of road vehicles. It provides the means for detecting exhaust system resonances with the potential to affect both exterior and interior sound quality.

This document incorporates certain provisions of ISO 5130:2007 for measuring the sound level of exhaust systems.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS4780G

SAE AMS4780G

Manganese Alloy, Brazing Filler Metal 66Mn - 16Ni - 16Co - 0.80B 1770 to 1875 degrees F (966 to 1024..

$41.00 $81.00

SAE AMS6362H

SAE AMS6362H

Steel Tubing, Seamless 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) 150 ksi (1034 MPa) Tensile Strength..

$41.00 $81.00

SAE AMS6365L

SAE AMS6365L

Steel Tubing, Seamless 0.95Cr - 0.20Mo (0.33 - 0.38C) (SAE 4135) Normalized or Stress Relieved..

$41.00 $81.00

SAE AMS6490J

SAE AMS6490J

Steel Bars, Forgings, and Tubing 4.0Cr - 4.2Mo - 1.0V (0.77 - 0.85C) (M-50) Premium Aircraft-Quality..

$41.00 $81.00