• SAE J1502_201305

SAE J1502_201305

  • Connections for Fluid Power and General Use - Hydraulic Couplings - Diagnostic
  • standard by SAE International, 05/03/2013
  • Category: SAE

$81.00 $41.00

SAE J1502 specifies dimensions, performance requirements, and test procedures for the male half of a diagnostic coupler with either a metric M14x1.5 or an inch 9/16-18 straight thread stud end. The coupler is designed for use with a mineral based hydrualic fluid. It is used on machines specified in SAE J1116. It does not apply to the mating hydraulic quick action couplings not on the machine.

Diagnostic couplings in accordance with SAE J1502 may be used at a working pressure of 42 MPa. The permissible working pressure depends upon the materials, design, working conditions, applications, etc.

Conformance to the dimensional information in this part of SAE J1502 does not guarantee rated performance. Each manufacturer should perform testing according to the specification contained in this document to ensure that components comply with the performance rating.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AS8048

SAE AS8048

Performance Standard for Passenger Smoke and Toxic Fumes Respiratory Protective Equipment..

$41.00 $81.00

SAE AMS2759/9E

SAE AMS2759/9E

Hydrogen Embrittlement Relief (Baking) of Steel Parts..

$41.00 $81.00

SAE AMS4378

SAE AMS4378

Aluminum Alloy, Plate (7160-T7651) 7.0Zn - 2.2Cu - 1.5Mg - 0.10Zr Solution Heat Treated, Stress Reli..

$41.00 $81.00

SAE ARP6287

SAE ARP6287

Environmental Degradation of Composite Materials..

$41.00 $81.00