• SAE J160_201302

SAE J160_201302

  • Swell, Growth, and Dimensional Stability of Friction Materials and Noise Insulators when Exposed to Elevated Temperatures
  • standard by SAE International, 02/13/2013
  • Category: SAE

$81.00 $41.00

This performance standard specifies a universal method of measuring the dimensional change of friction materials to determine the effects of temperature. The test applies to both disc and drum type linings commonly used in hydraulic and air brake systems for automotive and commercial vehicle applications.

This standard describes two main test procedures. Method A, where the friction material is in contact with a heated surface to simulate the heat input to the pad that occurs during actual usage. Method B uses an oven to heat the freestanding material and is na approximate procedure requiring less instrumentaiton. Method A is recommended for disc brake pad assemblies, noise insulators, or flat coupons; while Method B is recommended for curved drum brake linings.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS5842G

SAE AMS5842G

Cobalt-Nickel Alloy, Corrosion and Heat-Resistant, Bars 19Cr - 36Co - 25Ni - 7.0Mo - 0.50Cb (Nb) - 2..

$41.00 $81.00

SAE AMS5843G

SAE AMS5843G

Cobalt-Nickel Alloy, Corrosion and Heat-Resistant, Bars 19Cr - 36Co - 25Ni - 7.0Mo - 0.50Cb (Nb) - 2..

$41.00 $81.00

SAE AMS6386D

SAE AMS6386D

Steel Sheet and Plate Low Alloy, Heat Treated 90,000 psi (621 MPa) and 100,000 psi (690 MPa) Yield S..

$41.00 $81.00

SAE AS39029/118

SAE AS39029/118

CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, ENGINE APPLICATION (FOR MIL-DTL-38999 SERIES I..

$41.00 $81.00