• SAE J1647_201505

SAE J1647_201505

  • Plastic Materials and Coatings for Use In or On Optical Parts Such as Lenses and Reflectors of High-Intensity Discharge Forward
  • standard by SAE International, 05/26/2015
  • Category: SAE

$81.00 $41.00

This SAE Recommended Practice provides test methods and requirements to evaluate the suitability of plastic optical materials for possible use in discharge forward lighting (DFL) devices in motor vehicles. These materials are typically used for lenses and reflectors. Separate testing is required for each combination of material, industrial coating, DFL light source, and device focal length. The tests are intended to determine physical and optical characteristics of the materials and coatings. Performance expectations of finished assemblies, including plastic components, are to be based on tests for lighting devices, as specified in SAE Standards and Recommended Practices for motor vehicle lighting equipment. Optical components exposed to weathering should also be subject to SAE J576.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS4442G

SAE AMS4442G

Magnesium Alloy Sand Castings 3.2 Rare Earths - 2.5Zn - 0.70Zr (EZ33A-T5) Precipitation Heat Treated..

$41.00 $81.00

SAE J732_201206

SAE J732_201206

Specification Definitions - Loaders..

$41.00 $81.00

SAE AS4832

SAE AS4832

Gland Design: Nominal 3/8 in Cross Section for Custom Compression Type Seals..

$41.00 $81.00

SAE ARP798A

SAE ARP798A

Design Criteria for White Incandescent Lighted Aerospace Instruments..

$41.00 $81.00