• SAE J1648_201304

SAE J1648_201304

  • Protective Coatings for Fasteners
  • standard by SAE International, 04/15/2013
  • Category: SAE

$81.00 $41.00

This SAE Information Report is provided as an advisory guide. Careful discretion as to application is recommended. The content has been presented as accurately as possible, but responsiblity for its application lies with the user. It covers finishes applied to fasteners and related topics, corrosion resistance, lubricity, electrical grounding, ultraviolet light, and embrittlement.

Table 1 lists these coatings and their properties so that finish selection can be reasonably made in accordance with known and anticipated fastener assembly applications.

Application of protective coatings will affect fastener dimensions. This is especially critical for the thread fit of mating parts because the pitch diameter increases by four times the coating thickness. Explanation is covered in Section 5.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS4415A

SAE AMS4415A

Aluminum Alloy Extrusions 8.9Zn - 2.2Cu - 2.2Mg - 0.15Zr (7136-T76511, -T76510) Solution Heat Treate..

$41.00 $81.00

SAE AMS4156K

SAE AMS4156K

Aluminum Alloy, Extrusions 0.68Mg - 0.40Si (6063-T6) Solution and Precipitation Heat Treated..

$41.00 $81.00

SAE AMS4086N

SAE AMS4086N

Aluminum Alloy, Drawn, Round, Seamless Hydraulic Tubing 4.4Cu - 1.5Mg - 0.60Mn (2024-T3) Solution He..

$41.00 $81.00

SAE AMS3376C

SAE AMS3376C

Sealing Compound, Non-Curing, Fluorosilicone Groove Injection Temperature and Fuel Resistant..

$41.00 $81.00