• SAE J1661_201104

SAE J1661_201104

  • Procedure Retrofitting CFC-12 (R-12) Mobile Air-Conditioning Systems to HFC-134a (R-134a) (Stabilized: Apr 2011)
  • standard by SAE International, 04/01/2011
  • Category: SAE

$81.00 $41.00

The purpose of this SAE Recommended Practice is to provide a service procedure for retrofitting a CFC-12 (R-12) system to HFC-134a (R-134a) while preserving performance and integrity of the air-conditioning (A/C) system. The steps outlined in this procedure are complete when combined with good service practices and the vehicle manufacturer's recommendations (if available) for retrofitting their models.

Separate service equipment, for CFC-12 (R-12) and HFC-134a (R-134a), including refrigerant recovery/ recycle (R/R), service manifolds, vacuum pumps, and charging equipment shall be used to preserve the purity of the refrigerants and the mobile A/C systems. This procedure will minimize release of refrigerant to the atmosphere, and will preserve the integrity of the recycled CFC-12 (R-12) and HFC-134a (R-134a) supplies.

This document applies to air conditioning systems used to cool the passenger compartment of the automobiles, light trucks, and other vehicles with similar CFC-12 (R-12) systems. Due to technical advancements in recent years, this procedure is recommended for common vehicle platforms produced in the mid- 1980s and later. Vehicles produced before this time period may require additional retrofit requirements. A/C systems used on mobile vehicles for refrigerated cargo that have hermetically sealed systems are not covered by this document.

This Document is complete only when combined with the requirements of SAE J1657 "Selection Criteria for Retrofit Refrigerants to Replace CFC-12 (R-12) in Mobile Air-Conditioning Systems."
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMSC27725C

SAE AMSC27725C

Coating, Corrosion Preventive, Polyurethane For Aircraft Integral Fuel Tanks for Use to 250 °F (121..

$41.00 $81.00

SAE AMS5544J

SAE AMS5544J

Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate, 57Ni - 19.5Cr - 13.5Co - 4.2Mo ..

$41.00 $81.00

SAE AMS7205G

SAE AMS7205G

Spring Pins, Tubular, Carbon Steel..

$41.00 $81.00

SAE AMS3128G

SAE AMS3128G

Aluminum Pigment Paste..

$41.00 $81.00