• SAE J1926/1_201609

SAE J1926/1_201609

  • Connections for General Use and Fluid Power - Ports and Stud Ends with ASME B1.1 Threads and O-Ring Sealing - Part 1: Threaded P
  • standard by SAE International, 09/09/2016
  • Category: SAE

$81.00 $41.00

This part of SAE J1926 specifies dimensions for fluid power and general use ports with inch threads in accordance with ASME B1.1 for use with adjustable and nonadjustable stud ends shown in SAE J1926-2 and SAE J1926-3.

Ports in accordance with this part of SAE J1926 may be used at working pressures up to 63 MPa for nonadjustable stud ends and up to 40 MPa for adjustable stud ends. The permissible working pressure depends upon materials, design, working conditions, application, etc.

For threaded ports and stud ends specified in new designs for hydraulic fluid power applications, only ISO 6149 shall be used. Threaded ports and stud ends in accordance with ISO 1179, ISO 9974, and ISO 11926 shall not be used for new designs in hydraulic fluid power applications.

PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS2588

SAE AMS2588

Ultrasonically Activated Needle Peen Forming..

$41.00 $81.00

SAE AMS5665N

SAE AMS5665N

Nickel Alloy, Corrosion and Heat Resistant, Bars, Forgings, and Rings 74Ni - 15.5Cr - 8.0Fe..

$41.00 $81.00

SAE AMS2641B

SAE AMS2641B

Vehicle, Magnetic Particle Inspection, Petroleum Base..

$41.00 $81.00

SAE AMS2280C

SAE AMS2280C

Trace Element Control Nickel Alloy Castings..

$41.00 $81.00