• SAE J1927_201406

SAE J1927_201406

  • Cumulative Damage Analysis for Hydraulic Hose Assemblies (Stabilized: Jun 2014)
  • standard by SAE International, 06/04/2014
  • Category: SAE

$81.00 $41.00

This SAE Information Report is intended to provide the hydraulic system analyst with a procedure which will assist in the selection and use of high-pressure wire reinforced hydraulic hose assemblies. Many construction, agricultural, industrial, or commercial equipment systems utilize hydraulic hose assemblies that are subjected to irregular cyclic pressure variations (cannot be approximated by a constant amplitude pressure cycle). This document relates damage done by pressure cycles with the pressure-life performance curve for the hose assembly being evaluated, using a linear damage rule to predict fatigue life similar to that used for predicting metal fatigue life. More detailed information on the subject may be found in SAE Paper No. 880713. The accuracy of cumulative damage calculations is directly related to proper measurement of the service pressure history and pressure-life performance for the hose assembly being evaluated. Final selection of a hose assembly must also consider installation and maintenance as noted in SAE J1273.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AS25442A

SAE AS25442A

DIES, FOR MS25441, HYDRAULIC CRIMPING, TOOL (FOR USE WITH ALUMINUM WIRE TERMINALS) (Stabilized: Aug ..

$41.00 $81.00

SAE AS25472A

SAE AS25472A

GAGE, IN-SERVICE-INSPECTION, FOR USE WITH MS25442 CRIMPING DIES (FOR USE WITH ALUMINUM WIRE TERMINAL..

$41.00 $81.00

SAE AS3108A

SAE AS3108A

BOLT, MACHINE - HEXAGON HEAD, DRILLED 1 HOLE, PD SHANK, CRES AMS5731 (UNS S66826), .2500-28 UNJF-3A..

$41.00 $81.00

SAE AS3156A

SAE AS3156A

BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, CLOSE TOLERANCE SHANK, AMS4967, .190-3..

$41.00 $81.00