• SAE J1937_201109

SAE J1937_201109

  • Engine Testing with Low-Temperature Charge Air-cooler Systems in a Dynamometer Test Cell (Stabilized: Sep 2011)
  • standard by SAE International, 09/06/2011
  • Category: SAE

$81.00 $41.00

This document has been declared "Stablized" by the SAE IC Powertrain Steering Committee and will not longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability of technical requirements. Newer technology may exist.

The methods presented in this SAE Recommended Practice apply to the controlled testing of low-temperature charge, air-cooled, heavy-duty diesel engines. this document encompasses the following main sections: a.) definitions of pertinent parameters; b.) Vehicle testing to determine typical values for these parameters; c.) Description of the setup and operation of the test cell system; and d.) Validation testing of the test cell system.

While not covered in this document, computer modeling of the vehicle engine cooler system is recognized as a valid tool to determine cooler system performance and could be utilized to supplement the testing described. However, adequate in-vehicle testing should be performed to validate the model before it is used for the purposes outlined.

The procedure makes references to test cycles that are prescribed by the United States Environmental Protection Agency (US EPA) and are contained in the Code of Federal Regulations. The existence of other international test cycles, which can be used for validation testing, is acknowledged.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS5334J

SAE AMS5334J

Steel, Investment Castings 0.50Cr - 0.55Ni - 0.20Mo (0.25 - 0.35C) (SAE 8630 Mod) Normalized and Tem..

$41.00 $81.00

SAE J2082_201809

SAE J2082_201809

Cooling Flow Measurement Techniques..

$41.00 $81.00

SAE AMS1424P

SAE AMS1424P

Fluid, Aircraft Deicing/Anti-Icing, SAE Type I..

$41.00 $81.00

SAE AIR1316B

SAE AIR1316B

Airline Tow Tractor - Baggage/Cargo Factors for Design Consideration..

$41.00 $81.00