• SAE J2001_200806

SAE J2001_200806

  • Internal Combustion Engines--Piston Rings--Half Keystone Rings
  • standard by SAE International, 06/30/2008
  • Category: SAE

$81.00 $41.00

This SAE Standard specifies the essential dimensional features of HK- and HKB- half keystone rings with narrow ring width types.

Dimensional and allow for the use of cast iron (table 6) or steel (table 7). Since the modulus of elasticity of steel rings is higher than that of cast iron rings, the fluctuation int he surface pressure will become greater if the free gap is set as the reference for forces. Therefore, forces are set using the surface pressure as the reference in order to minimize the effect of the fluctuation.

The requirements of this document apply to half keystone rings of reciprocating internal combustion engines up to and including 70 mm diameter for cast iron rings and up to and including 100 mm diameter for steel rings.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS7205G

SAE AMS7205G

Spring Pins, Tubular, Carbon Steel..

$41.00 $81.00

SAE AMS3128G

SAE AMS3128G

Aluminum Pigment Paste..

$41.00 $81.00

SAE AMS3170G

SAE AMS3170G

Thinner, Alcohol-Ester..

$41.00 $81.00

SAE AMS5950B

SAE AMS5950B

Nickel Alloy, Corrosion and Heat-Resistant, Sheet and Strip 52.5Ni - 19Cr - 3.0Mo - 5.0Cb - 0.90Ti -..

$41.00 $81.00