• SAE J2012_201303

SAE J2012_201303

  • Diagnostic Trouble Code Definitions
  • standard by SAE International, 03/07/2013
  • Category: SAE

$81.00 $41.00

This document supersedes SAE J2012 DEC2007, and is technically equivalent to ISO 15031-6:2010 with the exceptions described in Section 1.2.

This document is intended to define the standardized Diagnostic Trouble Codes (DTC) that On-Board Diagnostic (OBD) systems in vehicles are required to report when malfunctions are detected. SAE J2012 may also be used for decoding of enhanced diagnositc DTCs and specifies the ranges reserved for vehicle manufacturer specific usage.

This document includes: a. Diagnostic Trouble Code format; b. A description of the standardized set of Diagnostic Trouble Codes and descriptions contained in SAE J2012-DA. The two most significant bytes of a DTC may be decoded according to two different lists; DTC Format Identifier 0x00 and 0x04.; c. A description of the standardized set of Dianostic Trouble Codes subtypes known as Failure Types contained in SAE J2012-031 (applies only when three byte DTCs are used.)
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE ARP5435

SAE ARP5435

APU Gas Turbine Engine Test Cell Correlation..

$41.00 $81.00

SAE AMS3138D

SAE AMS3138D

Coating Materials, Fluorocarbon (FKM) Elastomeric..

$41.00 $81.00

SAE J2244/2_200712

SAE J2244/2_200712

Connections for Fluid Power and General Use--Ports and Stud Ends with ISO 261 Threads and O-Ring Sea..

$41.00 $81.00

SAE J2244/3_200712

SAE J2244/3_200712

Connections for Fluid Power and General Use--Ports and Stud Ends with ISO 261 Metric Threads and O-R..

$41.00 $81.00