• SAE J2284/5_201609

SAE J2284/5_201609

  • High-Speed CAN (HSC) for Vehicle Applications at 500 kbps with CAN FD Data at 5 Mbps
  • standard by SAE International, 09/09/2016
  • Category: SAE

$81.00 $41.00

This SAE Recommended Practice will define the Physical Layer and portions of the Data Link Layer of the Open Systems Interconnection model (ISO 7498) for a 500 kbps arbitration bus with CAN FD Data at 5 Mbps High-Speed CAN (HSC) protocol implementation. Both ECU and media design requirements for networks will be specified. Requirements will primarily address the CAN physical layer implementation.

Requirements will focus on a minimum standard level of performance from the High-Speed CAN (HSC) implementation. All ECUs and media shall be designed to meet certain component level requirements in order to ensure the HSC implementation system level performance at 500 kbps arbitration bus with CAN FD Data at 5 Mbps. The minimum performance level shall be specified by system level performance requirements or characteristics described in detail in Section 6 of this document.

This document is designed such that if the Electronic Control Unit (ECU) requirements defined in Section 6 are met, then the system level attributes should be obtainable.

This document will address only requirements which may be tested at the ECU and media level. No requirements which apply to the testing of the HSC implementation as integrated into a vehicle are contained in this document. However, compliance with all ECU and media requirements will increase the possibility of communication compatibility between separately procured components and will greatly simplify the task of successfully integrating a HSC communication system in a vehicle.

PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AS4407A

SAE AS4407A

FITTING ASSEMBLY, ELBOW 90¿¿, REDUCER AND NONREDUCER, INTERNAL FLARE TO FLARED TUBE..

$41.00 $81.00

SAE ARP5890A

SAE ARP5890A

Guidelines for Preparing Reliability Assessment Plans for Electronic Engine Controls..

$41.00 $81.00

SAE AS150401A

SAE AS150401A

Nut-Hex, Check UNS G87400..

$41.00 $81.00

SAE AS3326A

SAE AS3326A

NUT, SELF-LOCKING-CAPTIVE WASHER, STEEL..

$41.00 $81.00