• SAE J2293/2_201402

SAE J2293/2_201402

  • Energy Transfer System for Electric Vehicles - Part 2: Communication Requirements and Network Architecture (Stabilized: Feb 2014
  • standard by SAE International, 02/26/2014
  • Category: SAE

$81.00 $41.00

SAE J2293 establishes requirements for Electric Vehicles (EV) and the off-board Electric Vehicle Supply Equipment (EVSE) used to transfer electrical energy to an EV from an Electric Utility Power System (Utility) in North America. This document defines, either directly or by reference, all characteristics of the total EV Energy Transfer System (EV-ETS) necessary to insure the functional interoperability of an EV and EVSE of the same physical system architecture. The ETS, regardless of architecture, is responsible for the conversion of AC electrical energy into DC electrical energy that can be used to charge the Storage Battery of an EV, as shown in Figure 1.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS3778/2B

SAE AMS3778/2B

Tape, Woven, Nylon 290 Pounds Force (1290 N) (Stabilized: Dec 2013)..

$41.00 $81.00

SAE AMS5377G

SAE AMS5377G

Nickel Alloy, Corrosion and Heat-Resistant, Investment Castings 73Ni - 12Cr - 4.5Mo - 2.0Cb - 0.70Ti..

$41.00 $81.00

SAE AMS5396E

SAE AMS5396E

Nickel Alloy, Corrosion and Heat Resistant, Investment Castings, 65Ni - 28Mo - 5.5Fe - 0.4V (N-12MV)..

$41.00 $81.00

SAE AMS5643T

SAE AMS5643T

Steel, Corrosion-Resistant, Bars, Wire, Forgings, Tubing, and Rings 16Cr - 4.0Ni - 0.30Cb (Nb) - 4.0..

$41.00 $81.00