• SAE J2360_201204

SAE J2360_201204

  • Automotive Gear Lubricants for Commercial and Military Use
  • standard by SAE International, 04/25/2012
  • Category: SAE

$81.00 $41.00

The gear lubricants covered by this standard exceed American Petroleum Institute (API) Service Classification API GL-5 and are intended for hypoid type, automotive gear units, operating under conditions of high-speed/shock load and lowspeed/ high-torque. These lubricants may be appropriate for other gear applications where the position of the shafts relative to each other and the type of gear flank contact involve a large percentage of sliding contact. Such applications typically require extreme pressure (EP) additives to prevent the adhesion and subsequent tearing away of material from the loaded gear flanks. These lubricants are not appropriate for the lubrication of worm gears.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AS81044/12A

SAE AS81044/12A

WIRE, ELECTRIC, CROSSLINKED POLYALKENE INSULATED, TIN-COATED COPPER LIGHT WEIGHT, 600-VOLT, 150 ¿¿C..

$41.00 $81.00

SAE AMS4473A

SAE AMS4473A

Aluminum Alloy Plate (2624-T39) 4.1Cu ¿¿¿ 1.4Mg - 0.6Mn Solution Heat Treated, Cold Worked and Natur..

$41.00 $81.00

SAE AS25050B

SAE AS25050B

Colors, Aeronautical Lights and Lighting Equipment, General Requirements For..

$41.00 $81.00

SAE J1930DA_201703

SAE J1930DA_201703

J1930 Electrical/Electronic Systems Diagnostic Terms, Definitions, Abbreviations, and Acronyms Web T..

$41.00 $81.00