• SAE J2435_201508

SAE J2435_201508

  • Welded Flash Controlled, SAE 1021 Carbon Steel Tubing, Normalized for Cold Forming, Welding and Brazing
  • standard by SAE International, 08/11/2015
  • Category: SAE

$81.00 $41.00

The SAE Standard covers normalized electric resistance welded flash controlled single-wall, carbon steel pressure tubing intended for use as pressure lines and in other applications requiring tubing of a quality suitable for cold forming, welding and brazing. Material produced to this specification should not be used for single flare applications due to the potential leak path that would be caused by the ID weld bead or scarfed region. Assumption of risks when using this material for single flare applications to be defined by agreement between the producer and tube purchaser. The grade of material produced to this specification is higher in carbon and manganese content than the grade of material specified in SAE J356 and is intended to service higher pressure applications than equivalent sizes of SAE J356. Due to the higher carbon and manganese content the forming characteristics of the finished tube are diminished versus the SAE J356 product. Special attention to the overall forming requirements of the finished assembly shall be taken into consideration when specifying material produced to this specification.   In an effort to standardize within a global marketplace and ensuring that companies can remain competitive in an international market it is the intent to convert to metric tube sizes which will: •Lead to one global system •Guide users to preferred system •Reduce complexity •Eliminate inventory duplications
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS3961/1

SAE AMS3961/1

350 ¿¿F Autoclave Cure, Low Flow Toughened Epoxy Prepregs, Type 38, Class 2, Grade 193, Style 3K-70-..

$41.00 $81.00

SAE AMS3961/2

SAE AMS3961/2

350 ¿¿F Autoclave Cure, Low Flow Toughened Epoxy Prepregs, Type 35, Class 1, Grade 190, Fiber 2..

$41.00 $81.00

SAE AMS3961/3

SAE AMS3961/3

350 ¿¿F Autoclave Cure, Low Flow Toughened Epoxy Prepregs, Type 35, Class 1, Grade 190, Fiber 1..

$41.00 $81.00

SAE AMS4070N

SAE AMS4070N

Aluminum Alloy, Drawn, Round Seamless Tubing 2.5Mg - 0.25Cr (5052-O) Annealed..

$41.00 $81.00