• SAE J2436_201607

SAE J2436_201607

  • Accessory Drive Tensioner Test Standards
  • standard by SAE International, 07/01/2016
  • Category: SAE

$81.00 $41.00

To document test procedures and set-ups that address known failure modes for Accessory Drive automatic tensioners This SAE Standard does not encompass the pulley or pulley bearing. The sample sizes and acceptance criteria should be determined by agreement between the original equipment manufacturer (OEM) and the supplier.

The failure modes to be addressed are:

Test Factors include:

NOTE: The Belt Drive Committee recommends that this spec be run using test parts that are close to the upper and lower specifications for load output and damping (tails testing).

PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS3901/7D

SAE AMS3901/7D

Yarn, Organic Fiber (Para-Aramid), High Modulus 2160 Denier (2400 d tex), 0.6% Finish..

$41.00 $81.00

SAE J2475_201407

SAE J2475_201407

Wheel End Assembly and Axle Spindle Interface Dimensions - Truck and Bus..

$41.00 $81.00

SAE AMS3901/10C

SAE AMS3901/10C

Yarn, Organic Fiber (Para-Aramid), High Modulus 1140 (1270 d tex) Denier, 1.2% Finish..

$41.00 $81.00

SAE AMS2664F

SAE AMS2664F

BRAZING, SILVER For Use Up to 800 ¿¿F (427 ¿¿C)..

$41.00 $81.00