• SAE J2467_200802

SAE J2467_200802

  • Welded and Cold-Drawn, SAE 1021 Carbon Steel Tubing Normalized for Bending and Flaring
  • standard by SAE International, 02/08/2008
  • Category: SAE

$81.00 $41.00

The SAE Standard covers normalized electric resistance welded, cold-drawn, single-wall, SAE 1021 carbon steel pressure tubing intended for use as pressure lines and in other applications requiring tubing of a quality suitable for bending, flaring, forming, and brazing.

The grade of material produced to this specification is higher in carbon content and manganese content than the grade of material specified in SAE J525. The material produced to this specification is intended to service higher pressure applications than like sizes of SAE J525. Due to the higher carbon and manganese content, however, the forming characteristics of the finished tube is diminished somewhat when compared to SAE J525. Special attention to the overall forming requirements of the finished assembly should be taken into consideration when utilizing material produced to this specification.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS4453E

SAE AMS4453E

Magnesium Alloy, Investment Castings 9.0Al 2.0Zn (AZ92A-T6) Solution and Precipitation Heat Treated..

$41.00 $81.00

SAE AMS4473

SAE AMS4473

Aluminum Alloy Plate (2624-T39) 4.1Cu – 1.4Mg - 0.6Mn Solution Heat Treated, Cold Worked and Natur..

$41.00 $81.00

SAE AMS4897C

SAE AMS4897C

Titanium Alloy, Sheet and Strip 15Mo - 3.0Al - 2.8Cb - 0.20Si..

$41.00 $81.00

SAE AMS4899C

SAE AMS4899C

Titanium Alloy, Sheet, Strip, and Plate 4.5Al - 3V - 2Fe - 2Mo Annealed..

$41.00 $81.00