• SAE J265_201511

SAE J265_201511

  • Diesel Fuel Injector Assembly - Types 8, 9, 10, and 11
  • standard by SAE International, 11/24/2015
  • Category: SAE

$81.00 $41.00

This SAE Standard specifies the dimensional requirements necessary for the mounting and interchangeability of four types of fuel injectors in diesel engines. Two of the types specified are flats-located injectors. The location and dimensions of the fuel inlet, leak-off connections, and type of attachment are not defined since they may vary according to the particular application. Field of Application This document is applicable to nozzle holder types 8 and 10 of an unspecified means of angular location and flats-located types 9 and 11 with a 17.0 mm (nominal) shank diameter. The internal construction of the fuel injector remains optional with the manufacturer.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AS3126B

SAE AS3126B

PIN, EXPANSION - CRES, 416 OR 416SE, LONG, UNS S41600/UNS S41623..

$41.00 $81.00

SAE AS3127B

SAE AS3127B

PLUG, EXPANSION - CRES, 416 OR 416SE, SHORT; STD AND .010 OVERSIZE DIAMETERS, UNS S41600/UNS S41623..

$41.00 $81.00

SAE AS3128B

SAE AS3128B

PIN, EXPANSION - CRES, 416 OR 416SE, SHORT, UNS S41600/UNS S41623..

$41.00 $81.00

SAE AS3129B

SAE AS3129B

PLUG, EXPANSION - CRES, 303, LONG; STD AND .010 OVERSIZE DIAMETERS, UNS S30300..

$41.00 $81.00