• SAE J2654_201204

SAE J2654_201204

  • Hardness of Brake Lining
  • standard by SAE International, 04/19/2012
  • Category: SAE

$81.00 $41.00

Hardness measurements are used as a quality control check of the consistency of formulation and processing of brake linings. This hardness method is nondestructive.

NOTE?This method is not a measure of friction level.

The hardness and the range of hardness are characteristic of each formulation; therefore, the acceptable values and ranges must be established for each formulation and may be affected by processing.

NOTE?The hardness of sintered powder metal lining is usually determined with Rockwell superficial hardness equipment. (See ASTM B 347)
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS5675G

SAE AMS5675G

Nickel Alloy, Corrosion and Heat Resistant, Welding Wire, 70Ni - 2.4Mn - 15.5Cr - 3.0Ti - 7.0Fe..

$41.00 $81.00

SAE AS7108C

SAE AS7108C

NADCAP Audit Criteria for Chemical Processing..

$41.00 $81.00

SAE AS7109B

SAE AS7109B

NADCAP Requirements for Coatings..

$41.00 $81.00

SAE AMS4555J

SAE AMS4555J

Leaded Brass, Seamless Tubing, 66.5Cu - 32.5Zn - 0.48Pb, Light Annealed (050)..

$41.00 $81.00