• SAE J2718_201009

SAE J2718_201009

  • Test for Tire Quasi-Static Longitudinal Force vs. Longitudinal Displacement and Quasi-Static Lateral Force vs. Lateral Displacem
  • standard by SAE International, 09/07/2010
  • Category: SAE

$81.00 $41.00

This SAE Recommended Practice describes application of two closely related test procedures, which together determine the linear range longitudinal and lateral stiffnesses of a statically loaded non-rotating tire. The procedures apply to any tire so long as the equipment is properly sized to correctly conduct the measurements for the intended test tire. The data are suitable for use in determining parameters for road load models and for comparative evaluations of the measured properties in research and development.

Two closely related procedures are applied. In each procedure the contact center of a loaded tire on a locked spindle and its wheel center are displaced horizontally one with respect to the other so as to generate shear force versus shear deflection data. In the first procedure the displacement is purely longitudinal, parallel to the X'-axis in the SAE Tire Axis System. In the second procedure the displacement is purely lateral, parallel to the Y'-axis in the SAE Tire Axis System. These procedures are spelled out in the body of this document.

This document is test machine neutral. It may be applied using any type of test machine capable of fulfilling the requirements stated in this document. The test machine must be capable of accommodating the tire sizes to be tested.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS4978F

SAE AMS4978F

Titanium Alloy Bars, Wire, Forgings, and Rings, 6Al - 6V - 2Sn, Annealed..

$41.00 $81.00

SAE AMS2370K

SAE AMS2370K

Quality Assurance Sampling and Testing, Carbon and Low-Alloy Steel Wrought Products and Forging Stoc..

$41.00 $81.00

SAE AMS2372F

SAE AMS2372F

Quality Assurance Sampling and Testing, Carbon and Low-Alloy Steel Forgings..

$41.00 $81.00

SAE AMS5646N

SAE AMS5646N

Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing, and Rings, 18Cr - 11Ni - 0.60Cb(N..

$41.00 $81.00