• SAE J2731_201205

SAE J2731_201205

  • Low Speed Enveloping Test with Perpendicular and Inclined Cleats
  • standard by SAE International, 05/23/2012
  • Category: SAE

$81.00 $41.00

This SAE Recommended Practice describes a test method for measuring the forces and moments generated at a spindle when a tire rolls over a rectangular obstacle, cleat, at very low speed. The cleat used in a particular test condition is configured with its crest either perpendicular, 90\mD, to the path of the tire or optionally with its crest inclined at an angle to the path of the tire. The carriage to which the spindle is attached is rigidly constrained in position during each test condition so as to provide a good approximation to fixed loaded radius operation. The method discussed in this document provides cleat envelopment force and moment and tire angular position histories as functions of distance traveled. These histories are essentially free from variations due to tire non-uniformities. The method applies to any size tire so long as the equipment is properly scaled to conduct the measurements for the intended test tire. The data are suitable for use in determining parameters for road load models and for comparative evaluations of the measured properties in research and development.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AS4216

SAE AS4216

FITTING, BEAM SEAL, MALE BULKHEAD TUBE END, INTERNAL SWAGE, 4000 PSI, HYDRAULIC..

$41.00 $81.00

SAE AS4217

SAE AS4217

FITTING, ADAPTER, BEAM SEAL, BULKHEAD, EXTERNAL SWAGE TUBE END, HYDRAULIC, 3000 PSI..

$41.00 $81.00

SAE AS4218

SAE AS4218

FITTING, ELBOW, 45¿¿, BEAM SEAL, EXTERNAL THREAD, EXTERNAL SWAGE TUBE END, HYDRAULIC, 3000 PSI..

$41.00 $81.00

SAE AS4219

SAE AS4219

FITTING, ELBOW, 45¿¿, BEAM SEAL, BULKHEAD, EXTERNAL SWAGE TUBE END, HYDRAULIC, 3000 PSI..

$41.00 $81.00