• SAE J2779_201507

SAE J2779_201507

  • Low Speed Thorax Impact Test Procedure for the HIII 50th Male Dummy
  • standard by SAE International, 07/22/2015
  • Category: SAE

$81.00 $41.00

This procedure establishes a recommended practice for performing a Low Speed Thorax Impact Test to the Hybrid III 50th Male Anthropomorphic Test Device (ATD or crash dummy). This test was created to satisfy the demand by the industry to have a calibration test which resulted in similar results to an actual low energy automotive impact test. An inherent problem exists with the current calibration procedure because the normal (6.7 m/s) thorax impact test has test corridors that are not representative to these low energy impact tests. The normal test corridors specify a displacement range of around 68 mm and the low speed displacement corridor needs to be around 25 mm.

The intent of this recommended practice is to develop a low speed thorax calibration procedure for the H-III50M dummy in 25 to 30 mm deflection range.

PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS4333C

SAE AMS4333C

Aluminum Alloy, Die Forgings, 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T7452), Solution Heat Treated, Co..

$41.00 $81.00

SAE AMS4990A

SAE AMS4990A

Titanium Alloy Sheet, Strip, and Plate, 6Al - 6V - 2Sn, Solution Heat Treated and Aged..

$41.00 $81.00

SAE AMS5336G

SAE AMS5336G

Steel, Investment Castings 0.95Cr 0.20Mo (0.25-0.35C) (SAE 4130 Mod) Normalized or Normalized and Te..

$41.00 $81.00

SAE AMS5338F

SAE AMS5338F

Steel, Investment Castings 0.95Cr 0.20Mo (0.35-0.45C) (SAE 4140 Mod) Normalized or Normalized and Te..

$41.00 $81.00