• SAE J2784_200909

SAE J2784_200909

  • FMVSS Inertia Dynamometer Test Procedure for Vehicles Below 4540 kg GVWR
  • standard by SAE International, 09/01/2009
  • Category: SAE

$81.00 $41.00

This document is derived from the Federal Motor Vehicle Safety Standards 105 and 135 vehicle test protocols as single-ended inertia-dynamometer test procedures. It measures brake output, friction material effectiveness, and corner performance in a controlled and repeatable environment. The test procedures also include optional sections for parking brake output performance for rear brakes. It is applicable to brake corners from vehicles covered by the FMVSS 105 and 135 when using the appropriate brake hardware and test parameters. The FMVSS 135 is applicable to all passenger cars and light trucks up to 3500 kg of GVWR. The FMVSS 105 is applicable to all passenger cars, multi-purpose vehicles, buses, and trucks above 3500 kg of GVWR. This document does not include testing for school bus applications or vehicles equipped with hydraulic brakes with a GVWR above 4540 kg.

PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS2431/1F

SAE AMS2431/1F

Peening Media (ASR) Cast Steel Shot, Regular Hardness (45 to 52 HRC)..

$41.00 $81.00

SAE AMS2451/3C

SAE AMS2451/3C

Plating, Brush, Nickel Low Stress, Low-Hardness Deposit..

$41.00 $81.00

SAE AMS3329C

SAE AMS3329C

ELASTOMER: FLUOROSILICONE RUBBER (FVMQ) FUEL AND OIL RESISTANT, HIGH STRENGTH 45 ¿¿¿ 55 SHORE A HARD..

$41.00 $81.00

SAE AMS3330C

SAE AMS3330C

Elastomer: Fluorosilicone (FVMQ) Rubber Fuel and Oil Resistant 45 ¿¿¿ 55 For Products in Fuel System..

$41.00 $81.00