• SAE J2802_201001

SAE J2802_201001

  • Blind Spot Monitoring System (BSMS): Operating Characteristics and User Interface
  • standard by SAE International, 01/14/2010
  • Category: SAE

$81.00 $41.00

This document specifies the minimum recommendations for Blind Spot Monitoring System (BSMS) operational characteristics and elements of the user interface. A visual BSMS indicator is recommended.

BSMS detects and conveys to the driver via a visual indicator the presence of a target (e.g., a vehicle), adjacent to the subject vehicle in the "traditional" Adjacent Blind Spot Zone (ABSZ). The BSMS is not intended to replace the need for interior and exterior rear-view mirrors or to reduce mirror size. BSMS is only intended as a supplement to these mirrors and will not take any automatic vehicle control action to prevent possible collisions. While the BSMS will assist drivers in detecting the presence of vehicles in their ABSZ, the absence of a visual indicator will not guarantee that the driver can safely make a lane change maneuver (e.g., vehicles may be approaching rapidly outside the ABSZ area).

This document applies to original equipment and aftermarket BSMS systems for passenger vehicles. This document does not apply to installing a BSMS on either motorcycles or commercial vehicles. Finally, this document does not address Lane Change Warning systems, which monitor areas substantially farther back than the side blind spot areas monitored by the BSMS (See ISO FDIS 17387).
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS2980/3B

SAE AMS2980/3B

Carbon Fiber Fabric and Epoxy Resin Wet Lay-Up Repair Material Part 3 ¿¿¿ Purchasing Specification -..

$41.00 $81.00

SAE AMS4914F

SAE AMS4914F

Titanium Alloy Cold Rolled Sheet and Strip 15V - 3Al - 3Cr - 3Sn Solution Heat Treated..

$41.00 $81.00

SAE ARP1330D

SAE ARP1330D

Welding of Structures for Ground Support Equipment (Stabilized: Apr 2014)..

$41.00 $81.00

SAE AS27194B

SAE AS27194B

SEAL, BONDED, ALUMINUM ALLOY 6061-T6, AMS4027, MOLD IN GROOVE, NBR RUBBER, AMS-P-5315..

$41.00 $81.00