• SAE J2812_201402

SAE J2812_201402

  • Road Load Tire Model Validation Procedures for Dynamic Behavior
  • standard by SAE International, 02/17/2014
  • Category: SAE

$81.00 $41.00

This SAE Recommended Practice describes an evaluation procedure for validating tire models for use in road load simulations and assesses the relevant dynamic behavior of tires. The laboratory test utilized is a “cleat” test, where a rolling tire on a drum encounters a cleat and the resulting dynamic forces and moments are measured. This test is described in SAE J2730, “Dynamic Cleat Test with Perpendicular and Inclined Cleats”. The test is commonly used to identify tire model parameters. In this recommended practice, requirements for the measurement of the tire’s response are described along with data processing techniques and calculations used to quantitatively compare the tire model’s calculated response to the tire’s response measured on test. This recommended practice addresses both the tire model structure and its parameters.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE J179_201305

SAE J179_201305

Labeling - Disc Wheels and Demountable Rims - Trucks (Stabilized: May 2013)..

$41.00 $81.00

SAE AMS6468E

SAE AMS6468E

Steel, Welding Wire 1.0Cr - 10Ni - 3.8Co - 0.45Mo - 0.08V (0.14 ¿¿¿ 0.17C) Vacuum Melted, Environmen..

$41.00 $81.00

SAE AMS4949A

SAE AMS4949A

Titanium, Sheet, Laminated, Surface Bonded..

$41.00 $81.00

SAE AMS4325

SAE AMS4325

Aluminum Alloy, Extruded Wide Panel Profiles (7150-T77511) 6.4Zn - 2.4Mg - 2.2Cu - 0.12Zr Solution H..

$41.00 $81.00