• SAE J2839_201002

SAE J2839_201002

  • Heavy Duty High Speed Datalink Connector
  • standard by SAE International, 02/18/2010
  • Category: SAE

$81.00 $41.00

This SAE Recommended Practice defines the performance requirements, size and mating interfaces for M12 style 4 and 5 pole Heavy Duty High Speed Datalink connection systems, and applies to both cable-to-cable and cable-to-device connectors.

High Speed Datalink connection systems, typically those operating at speeds that are greater than 10M bps, have been developed for commercial applications without regard to their potential application on heavy-duty vehicles or off-highway machines. This recommended practice is intended to be the standard for the heavy-duty connector mating interface and environmental performance requirements for High Speed Datalink connection systems. This standardization will assure mating compatibility of data link connectors from multiple connector suppliers while meeting industry performance requirements for heavy-duty applications.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS2759/4C

SAE AMS2759/4C

Heat Treatment Austenitic Corrosion-Resistant Steel Parts..

$41.00 $81.00

SAE AMS2759/1E

SAE AMS2759/1E

Heat Treatement of Carbon and Low-Alloy Steel Parts Minimum Tensile Strength Below 220 ksi (1517 MPa..

$41.00 $81.00

SAE AMS2759/2F

SAE AMS2759/2F

Heat Treatment of Low-Alloy Steel Parts Minimum Tensile Strength 220 ksi (1517 MPa) and Higher..

$41.00 $81.00

SAE AMS2759/7B

SAE AMS2759/7B

Carburizing and Heat Treatment of Carburizing Grade Steel Parts..

$41.00 $81.00