• SAE J2876_201505

SAE J2876_201505

  • Low Speed Knee Slider Test Procedure for the Hybrid III 50th Male Dummy
  • standard by SAE International, 05/07/2015
  • Category: SAE

$81.00 $41.00

This procedure establishes a recommended practice for performing a Low Speed Knee Slider test to the Hybrid III 50th Male Anthropomorphic Test Device (ATD or crash dummy). This test was created to satisfy the demand from industry to have a certification test which produces similar results to an actual low energy automotive impact test. An inherent problem exists with the current certification procedure because the normal (2.75 m/s) knee slider test has test corridors that do not represent typical displacements seen in these low energy impact tests. The normal test corridors specify a force requirement at 10 mm and at 18 mm, while the low speed test needs to have a peak displacement around 10 mm.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS7440E

SAE AMS7440E

Balls, Steel, Low-Chromium, High Carbon Hardened and Tempered (Stabilized: Jan 2016)..

$41.00 $81.00

SAE AMS5884D

SAE AMS5884D

Iron-Nickel Alloy, Bars, Forgings, and Rings 42Fe - 37.5Ni - 14Co - 4.8Cb(Nb) - 1.6Ti Solution Heat ..

$41.00 $81.00

SAE J3047_201601

SAE J3047_201601

Recommendation for Acceptable Operating Parameters of Heated Automobile Seats in Order to Mitigate O..

$41.00 $81.00

SAE AMSI83387B

SAE AMSI83387B

Inspection Process, Magnetic Rubber (Stabilized: Jan 2016)..

$41.00 $81.00