• SAE J2878_201001

SAE J2878_201001

  • Low Speed Thorax Impact Test Procedure for the HIII5F Dummy
  • standard by SAE International, 01/13/2010
  • Category: SAE

$81.00 $41.00

This procedure establishes a recommended practice for performing a Low Speed Thorax Impact Test to the Hybrid III Small Female Anthropomorphic Test Device (ATD or crash dummy). This test was created to satisfy the demand by the industry to have a certification test which results in peak chest deflection similar to current full vehicle, frontal impact tests. An inherent problem exists with the current certification procedure because the normal (6.7 m/s) thorax impact test has test results for peak chest deflection that are greater than those currently seen in full vehicle, frontal tests.

The intent of this document is to develop a low speed thorax certification procedure for the H-III5F dummy with a 3.0 m/s impact similar to the SAE J2779 procedure for the H-III50M dummy.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS5568G

SAE AMS5568G

Steel, Corrosion and Heat Resistant, Welded Tubing 17Cr - 7.1Ni - 1.1Al Solution Heat Treated, Preci..

$41.00 $81.00

SAE AMS5569B

SAE AMS5569B

Steel, Corrosion and Heat Resistant, Seamless and Welded Hydraulic Tubing 19Cr - 9.5Ni - 0.03C max C..

$41.00 $81.00

SAE AMS5604F

SAE AMS5604F

Steel, Corrosion Resistant, Sheet, Strip, and Plate 16.5Cr 4.0Ni 4.0Cu 0.30Cb, Solution Heat Treated..

$41.00 $81.00

SAE AMS5718D

SAE AMS5718D

Steel, Bars, Forgings, Tubing, and Rings, Corrosion Resistant, 11.8Cr - 2.5Ni - 1.8Mo - 0.33V (0.08 ..

$41.00 $81.00