• SAE J2884_200909

SAE J2884_200909

  • Thermoset Elastomer Specification System
  • standard by SAE International, 09/10/2009
  • Category: SAE

$81.00 $41.00

This document provides a method/ procedure for specifying the properties of vulcanized elastomeric materials (natural rubber or synthetic rubbers, alone or in combination) that are intended for, but not limited to, use in rubber products for automotive applications.

This document covers materials that do not contain any re-use; recycled; or regrind materials unless otherwise agreed to by manufacturer and end user. The use of such materials, including maximum % must be specified using a "Z" suffix.

This classification system covers thermoset High Consistency Elastomers (HCE's) only. Thermoplastic Elastomer (TPE) materials are classified using SAE J2558. Silicone Formed In Place Gasket (FIPG) systems such as Room Temperature Vulcanized (RTV) Silicones, and Liquid Silicone Rubber (LSR) systems are classified using ASTM F 2468.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS6947A

SAE AMS6947A

Titanium Alloy, Bars, Wire, Forgings, Rings, and Drawn Shapes 4Al - 2.5V -1.5 Fe Annealed, Heat Trea..

$41.00 $81.00

SAE AMS6948A

SAE AMS6948A

Titanium Alloy Bars, Wire, Forgings, Rings, and Drawn Shapes 4Al - 2.5V -1.5 Fe Annealed..

$41.00 $81.00

SAE ARP1796B

SAE ARP1796B

Engine Bleed Air Systems for Aircraft..

$41.00 $81.00

SAE ARP1816D

SAE ARP1816D

Charger for Battery Powered Ground Support Equipment..

$41.00 $81.00