• SAE J2891_201007

SAE J2891_201007

  • Auxiliary Power Unit Electrical Interface Requirements for Class Eight Trucks
  • standard by SAE International, 07/06/2010
  • Category: SAE

$81.00 $41.00

This SAE Recommended Practice covers the design and application of a 120 VAC single phase engine based auxiliary power unit or GENSET. This document is intended to provide design direction for the single phase nominal 120 VAC as it interfaces within the truck architecture providing power to truck sleeper cab hotel loads so that they may operate with the main propulsion engine turned off.

The purpose of this Recommended Practice is to provide design direction for the single phase nominal 120 VAC APU as it interfaces within the truck architecture providing power to truck sleeper cab user loads, HVAC loads, and vehicle battery charging, so that they may operate with the main propulsion engine turned off: This Recommended Practice applies to factory and after-market installed APU systems providing 120 VAC single phase power as a convenience for operator and passenger use. APUs are intended to power user loads not essential to vehicle operation or safety (e.g., HVAC, TV, microwave ovens, battery chargers for mobile phones or laptop computers, audio equipment, etc.); Systems typically incorporate a diesel engine, a generator, a control system and power distribution wiring. Requirements are given for the performance, safety, reliability, and environmental compatibility of the system; These are recommended guidelines to be used by OEM and APU or GENSET manufacturers in the development of their own specifications, which may incorporate more or less stringent requirements; This Recommended Practice scope excludes military vehicles, bus and 28 V systems.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS4786J

SAE AMS4786J

Gold-Palladium-Nickel Alloy, Brazing Filler Metal, High Temperature 70Au - 8.0Pd - 22Ni 1845 to 1915..

$41.00 $81.00

SAE AMS4788B

SAE AMS4788B

Silver Alloy Brazing Filler Metal 50Ag - 28Zn - 20Cu - 2.0Ni 1220 to 1305 ¿¿F (660 to 707 ¿¿C) Solid..

$41.00 $81.00

SAE AMS5679H

SAE AMS5679H

Nickel Alloy, Corrosion and Heat Resistant, Welding Wire 73Ni - 15.5Cr - 2.2Cb - 8.0Fe..

$41.00 $81.00

SAE AMS5831D

SAE AMS5831D

Alloy, Corrosion and Heat-Resistant, Welding Wire 29Fe - 22Cr - 21Ni - 18.5Co - 3.2Mo - 2.8W - 0.78T..

$41.00 $81.00