• SAE J2928_201805

SAE J2928_201805

  • Brake Rotor Thermal Cracking Procedure for Vehicles Below 4 540 kg GVWR
  • standard by SAE International, 05/16/2018
  • Category: SAE

$81.00 $41.00

This recommended practice is derived from common test sequences used within the industry. This procedure applies to all on-road passenger cars and light trucks up to 4 540 kg of GVWR. This recommended practice does not address other aspects such as performance, NVH, and durability. Test results from this recommended practice should be combined with other measurements and dynamometer tests (or vehicle-level tests), and acceptance criteria to validate a given design or configuration.

PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS4845H

SAE AMS4845H

Tin Bronze Castings, Sand and Centrifugal, 87.5Cu - 10Sn - 2Zn, As Cast..

$41.00 $81.00

SAE AMS5560M

SAE AMS5560M

Steel, Corrosion Resistant, Seamless Tubing, 19Cr - 10Ni (SAE 30304), Solution Heat Treated..

$41.00 $81.00

SAE AMS5831C

SAE AMS5831C

Alloy, Corrosion and Heat-Resistant, Welding Wire, 29Fe - 22Cr - 21Ni - 18.5Co - 3.2Mo - 2.8W - 0.78..

$41.00 $81.00

SAE AMS5836C

SAE AMS5836C

Nickel Alloy, Corrosion and Heat-Resistant, Welding Wire, 72Ni - 3.0Mn - 20Cr - 2.5Cb(Nb)..

$41.00 $81.00