• SAE J2973_201812

SAE J2973_201812

  • Fuel Components and Systems Leak Tightness Specifications and Test Practices (or Methods)
  • standard by SAE International, 12/19/2018
  • Category: SAE

$81.00 $41.00

This SAE recommended practice specifies a standard geometry leak channel to set the leak threshold and compare results from a variety of leak test technologies and test conditions. This practice applies to fuel system assemblies and components which have a risk of allowing regulated fuel or fuel vapors to continuously escape to atmosphere. A component or assembly tested to this standard has a zero HC leakage threshold because the selected leak channel (Equivalent Channel) will self-plug and will not emit measurable hydrocarbon liquid or vapors. Therefore this standard eliminates leaks as a source of evaporative emission. This practice was primarily developed for pressurized and non-pressurized fuel systems and components containing liquid hydrocarbon based fuels.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AS23053/11

SAE AS23053/11

INSULATION SLEEVING, ELECTRICAL, HEAT-SHRINKABLE FLUORINATED ETHYLENE PROPYLENE, NON-CROSSLINKED..

$41.00 $81.00

SAE J2913_201610

SAE J2913_201610

R-1234yf [HFO-1234yf] Refrigerant Electronic Leak Detectors, Minimum Performance Criteria..

$41.00 $81.00

SAE J2892DA_201610

SAE J2892DA_201610

Graphics - Based Service Information..

$41.00 $81.00

SAE AIR4295A

SAE AIR4295A

Handbook for the Digital Time Division Command/Response Multiplex Data Bus Test Plans (Stabilized: O..

$41.00 $81.00