• SAE J2995_201703

SAE J2995_201703

  • Strength and Durability Testing for Automotive Hydraulic Brake Components
  • standard by SAE International, 03/13/2017
  • Category: SAE

$81.00 $41.00

To assess the strength and durability for hydraulic brake components as a function of test conditions. These conditions may include: braking torque, hill-holding, braking forces, hydraulic pressure, brake temperatures, environmental and corrosion effects, vibration, and time. SAE J2995_201703 includes a systematic reference to other test methods and provides new test methods for durability life prediction based on the VDA 311 for operating strength for brake calipers. When using AK load collectives from vehicle testing for life prediction, the nominal vehicle life corresponds to 300000 km. Braking torques and forces take into account inputs from non-ABS, ABS, EPB, and ESC systems. It also applies to gasoline, diesel, hybrid, and electric vehicles. This RP applies to vehicles below 4540 kg of GVWR. With the appropriate engineering review and assessment for a given test program, this RP can apply (or be used) to scale the duty cycle (or special collective) to reflect regional, on-road special applications, or vehicles up to 7 tons of GVWR.
Except for the AK load collectives, which have proven correlation to customer usage, the damage content of other procedures requires (a) the quantification with actual laboratory testing to develop the corresponding S/N curves, and (b) the calculation of the equivalent damage at the test conditions for a given load collective.
The hydraulic components covered by this RP include:
  • a. Non-vacuum apply system (brake booster and master cylinder)
  • b. ABS modules
  • c. Service, IPB, and EPB calipers
  • d. Proportioning valves
  • e. Wheel cylinders
This RP has an accompanying electronic appendix with the tabular presentation as a spreadsheet of different test procedures by type and by component.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE J2984_201308

SAE J2984_201308

Identification of Transportation Battery Systems for Recycling Recommended Practice..

$41.00 $81.00

SAE AMS3384

SAE AMS3384

Rubber, Fluorocarbon Elastomer (FKM) 70 to 80 Hardness, Low Temperature Sealing Tg -22 ¿¿F (-30 ¿¿C)..

$41.00 $81.00

SAE AMS5361F

SAE AMS5361F

Steel Castings, Sand and Centrifugal, Corrosion and Heat-Resistant 18.5Cr - 13.5Ni - 2.1Mo Solution ..

$41.00 $81.00

SAE AMS5592F

SAE AMS5592F

Iron-Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 44Fe - 18.5Cr - 35Ni - 1.15..

$41.00 $81.00