• SAE J313_201706

SAE J313_201706

  • Diesel Fuels
  • standard by SAE International, 06/07/2017
  • Category: SAE

$81.00 $41.00

Automotive and railroad diesel fuels, in general, are derived from petroleum refinery products which are commonly referred to as middle distillates. Middle distillates represent products which have a higher boiling range than gasoline and are obtained from fractional distillation of the crude oil or from streams from other refining processes. Finished diesel fuels represent blends of middle distillates.

The properties of commercial distillate diesel fuels depend on the refinery practices employed and the nature of the crude oils from which they are derived. Thus, they may differ both with and within the region in which they are manufactured. Such fuels generally boil over a range between 163 and 371 °C (325 to 700 °F). Their makeup can represent various combinations of volatility, ignition quality, viscosity, sulfur level, gravity, and other characteristics. Additives may be used to impart special properties to the finished diesel fuel.

PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS4416B

SAE AMS4416B

Aluminum Alloy, Extruded Profiles (2196-T8511) 2.9Cu - 1.7Li - 0.4Mg - 0.4Ag - 0.10Zr Solution Heat ..

$41.00 $81.00

SAE AMS4490K

SAE AMS4490K

Magnesium Alloy Castings, Die 9.0Al - 0.70Zn (AZ91D, Temper F) As Cast..

$41.00 $81.00

SAE J238_201705

SAE J238_201705

Nut and Conical Spring Washer Assemblies (Stabilized: May 2017)..

$41.00 $81.00

SAE J2494/1_201705

SAE J2494/1_201705

Dimensional Specifications for Metallic Body Push-to-Connect Fittings Used on a Vehicular Air Brake ..

$41.00 $81.00