• SAE J4003_200810

SAE J4003_200810

  • H-Point Machine (HPM-II) - Procedure for H-Point Determination - Benchmarking Vehicle Seats
  • standard by SAE International, 10/21/2008
  • Category: SAE

$81.00 $41.00

Benchmarking is used to discover the design intent measurements for seating compartments in vehicles when these measurements are either unknown or are specified using differing measurement procedures.

This document provides the specifications and procedures to establish consistent measurements for benchmarking vehicle seating positions using the H-Point Machine (HPM-II1) described in SAE J4002 and the H-Point Design tool (HPD) described in SAE J4004. The HPM-II is a physical tool used to establish key reference points and measurements in a vehicle (Figure 1). The HPD is a CAD tool that aids in the benchmarking process (see Appendix A and SAE J4004).
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE J744_201610

SAE J744_201610

Hydraulic Pump and Motor Mounting and Drive Dimensions..

$41.00 $81.00

SAE AMS2374E

SAE AMS2374E

Quality Assurance Sampling and Testing Corrosion and Heat-Resistant Steel and Alloy Forgings..

$41.00 $81.00

SAE AMS4374

SAE AMS4374

Aluminum Alloy, Extruded Profiles 8.9Zn - 2.2Cu - 2.2Mg - 0.15Zr (7136-T73511) Solution Heat Treated..

$41.00 $81.00

SAE AMS5599H

SAE AMS5599H

Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 62Ni - 21.5Cr - 9.0Mo - 3.7 Cb (..

$41.00 $81.00